When building or upgrading a fiber optic network, the LC to LC duplex fiber patch cable is a critical component for reliable, high-speed data transmission. This cable features LC connectors on both ends in a duplex configuration, allowing simultaneous two-way communication. Whether you’re deploying in data centers, telecommunications, or enterprise LANs, understanding this cable’s specifications and applications ensures optimal performance.
[image: LC to LC duplex fiber patch cable with connectors]
LC to LC duplex patch cables come in singlemode (OS2) and multimode (OM1, OM2, OM3, OM4) variants. Singlemode cables use 9/125µm fiber for long-distance transmission (up to 40km), while multimode cables (e.g., 50/125µm OM4) are ideal for shorter distances (up to 550m at 10GbE). Choose based on your network’s reach and bandwidth needs.
The duplex clip ensures proper alignment of transmit (Tx) and receive (Rx) channels. Polarity types (A-to-A, A-to-B) must match your transceivers. Most applications use A-to-B polarity for standard connectivity.
Riser (OFNR) and Plenum (OFNP) jackets meet fire safety codes. Bend-insensitive fibers (e.g., ITU-T G.657) allow tighter bends without signal loss, perfect for crowded cable trays.
High-density environments benefit from LC’s small form factor (1.25mm ferrule). Duplex LC cables connect switches, servers, and storage area networks (SAN) for 10G, 25G, 40G, and 100G Ethernet.
Telcos use LC duplex cables for fiber-to-the-home (FTTH) connections, linking optical line terminals (OLT) to distribution frames.
Ruggedized versions with reinforced jackets withstand vibration, temperature extremes, and EMI in harsh environments.
| Feature | LC to LC Duplex | SC to SC Duplex | ST to ST Simplex (Pair) |
|---|---|---|---|
| Ferrule Size | 1.25mm | 2.5mm | 2.5mm |
| Density | High (up to 48 ports per 1U panel) | Medium (24 ports per 1U) | Low (12 ports per 1U) |
| Insertion Loss | ≤0.2dB (typical) | ≤0.3dB | ≤0.3dB |
| Pull-Proof | Yes (with latch) | Yes (push-pull) | No (bayonet) |
| Typical Use | Data centers, high-speed networks | Telecom, CATV | Legacy networks |
As shown, LC duplex cables offer higher port density and lower loss, making them the preferred choice for modern installations. For detailed standards, refer to IEEE 802.3 and TIA-568.
Simplex cables have a single fiber and connector, used for one-way transmission. Duplex cables have two fibers (typically side-by-side) for bidirectional communication. LC to LC duplex cables are essential for transceivers that require separate Tx and Rx paths.
Yes, but check the fiber type. For 40GBASE-SR4 and 100GBASE-SR10, use OM3 or OM4 multimode cables. For 40GBASE-LR4 and 100GBASE-LR4, use OS2 singlemode cables. Ensure the cable’s bandwidth and distance ratings meet your network specifications.
Consider distance and cost. Singlemode supports longer distances (up to 40km) and higher bandwidth but requires more expensive transceivers. Multimode is cost-effective for short-range (≤300m at 10GbE) and uses lower-cost VCSEL-based optics.
An LC to LC duplex fiber patch cable is a versatile and high-performance solution for modern fiber optic networks. Its compact connector, low loss, and duplex design make it ideal for data centers, telecom, and enterprise applications. By selecting the right fiber mode, jacket, and polarity, you ensure reliable connectivity for current and future speed upgrades. Always source from reputable manufacturers and follow installation best practices to maximize network uptime.
我们将在24小时内回复您
Discussion
Share your thoughts or ask questions about this article